Press Releases

CONTA-CLIP expands its cable entry portfolio, launching the KDS-R system for M20 to M63 round openings suited to cables with and without plugs. This new cable management system consists of a handful of basic components: the actual cable entry frame with an integrated gasket, a two-piece thread and locking adapter plus two-piece locknut to fix it in place, and sealing elements with a range of inlays. Assembly is tool-less, quick, and easy. Cables with and without plugs are simply fed through the enclosure opening and cable entry frame. Slit, tapered, finned sealing elements are fitted around individual cables on the inside. Cables with sealing elements are then pushed back to fit tight in the cable entry frame. I-, T-, and +-shaped inlays are available for M40 and larger openings, allowing for insertion of a variety of cable sealing elements as required. The cable entry frame as a whole is fixed in place by attaching a two-part thread and locking adapter to the frame on the outside of the enclosure and attaching a separable locknut on the inside. The special shape of the sealing elements ensures high IP66 ingress protection and strain relief working towards accordance with DIN EN 62444. The wide range of sealing elements for various diameters, shapes, and multiple holes offers high flexibility in creating wiring solutions. The tool-less system ensures that retrofitting work requires very little effort. Unused entry positions in the frame can be sealed with blanking plugs, which can be easily removed at any time to allow additional cables to be inserted.

Datum: 31.07.2019

Zeichen: 1578

The tool-less system offers versatile options for IP66 cable entry

Download

GSM-PRO2 series communication modules from CONTA-CLIP feature a Modbus RTU (RS485) interface that enables easy data exchange with other controllers. The modules operate in slave mode and can, for example, provide a PLC with added GSM functionality via an easy plug connection to the RS485 port directly on the C-type mounting rail. The GSM-PRO-CON extension module from CONTA-CLIP makes wiring even simpler. Plugged into the GSM-PRO2 module, it offers front-access terminals for connection to the controller. The GSM-PRO2 parameterization software can be programmed to send a text or email fault message to specified recipients when the status of the PLC input changes. Prompted by a text message that is sent to the GSM-PRO2 module, data is written into the PLC's digital and analog registers via the Modbus RTU interface. The PLC, acting as a master, reads out the data in order to trigger the corresponding actions. Various communication modules with and without GPS functionality are available for all common wireless standards up to 4G. Apps for iPhone and Android devices enable flexible monitoring and control and provide an instant overview over the statuses of several modules at once. Users do not need any programming skills to parameterize the modules. Firmware updates and online configuration changes can be easily carried out at any time via the GSM network, even after installing and commissioning the modules.

Datum: 18.07.2019

Zeichen: 1426

The compact communication module features a Modbus RTU interface for easy data exchange with the PLC

Download

Connection technology expert CONTA-CLIP supplies versatile components for simple and time-saving cable management. The tool-less KDS and KES cable entry systems enable easy routing and flexible rearrangement of cables and conduits in enclosures and control cabinets, with reliable strain relief and IP66 ingress protection. To install any number of differently sized and shaped cables, enclosures no longer need to be fitted with variously sized openings, reducing the machining effort to a minimum. This enables manufacturers to supply fully sealed, preconfigured machine enclosures and control cabinets without knowing the exact final wiring requirements. One-piece KES plates with push-through membranes enable high-density routing of up to 32 unassembled cables, wires, or conduits. The multi-part KDS system features a frame that can always stay in place once it is installed – removable sealing elements in different sizes can be inserted to change the assembly as needed. As a result, stock-keeping costs are also significantly reduced, since there is no need for various same-size enclosures with a range of different prepared openings. The KDSClick system consists of only three basic components: frames, inlays, and sealing elements. The sealing elements are available in over 100 variants for diameters ranging from 2 mm to 35 mm, with 1, 2, and 4 slots, for industrial flat ribbon cables, and as blind plugs. The frames are available for 4, 6, 8, or 10 sealing elements. Featuring an injected foam gasket, they preserve the IP66 protection rating even on painted or rough surfaces. To accommodate the selected sealing elements, various inlays (available in I, T, +, and ++ shapes) can be simply inserted in the frame. KDS-FP flange plates hold two or three KDSClick modules and provide space for a total of up to 30 sealing element positions, making them ideal for control cabinets that require a lot of wiring. CONTA-CLIP furthermore offers the KDS-R series for quick, tool-less assembly in metric M20 to M63 round enclosure openings. This system consists of a frame with an integrated gasket, a thread and locking adapter, a locknut, and sealing elements with optional inlays. The KDS program also includes KDS-FB frames for industrial flat ribbon cables. These are available in four frame widths and different partitions for flat as well as round cables.

Datum: 19.06.2019

Zeichen: 2368

The KDS and KES product families enable easy, variable cable management for all diameters and shapes

Download

Introducing GSM-PRO2 and GSM-PRO2E communication modules, CONTA-CLIP presents economic 4G wireless remote control and maintenance solutions for decentralized applications. If no 4G network is available, the modules automatically fall back on 3G or 2G networks. Users can enhance the GSM-PRO2 module by adding inputs and outputs using I/O extension modules. The basic GSM-PRO2E device features four relay outputs and 10 inputs. I/Os can be configured for digital (24V DC) or analog (0...10V and 0[4]...20mA) signals, as required. The manufacturer supplies suitable models for the European as well as the US market. GSM-PRO modules automatically alert users via text or email messages when the monitored process reaches a defined state or preset limits are exceeded. Control-room staff or service technicians can switch the digital relay outputs of the GSM-PRO2 via text messages. The devices' log functions enable tracking of communications, process values of the analog inputs, and I/O activation events over freely programmable periods of time. Log files can be read out via a USB interface or sent to an email address. Apps for iPhone and Android devices enable fast and easy monitoring and control of the communication modules and allow for a quick overview of all I/O statuses for several modules at once. Parameterization requires no programming skills. Firmware updates and configuration changes can be easily carried out at any time via the GSM network, even after installation and commissioning of the modules.

Datum: 12.06.2019

Zeichen: 1518

The configurable communication modules enable remote control and maintenance via 4G wireless networks

Download

CONTA-CLIP provides all necessary tools for customizing its UL- and VDE-certified VK series cabling ducts. The VK-S cutter allows for shortening up to 125 mm wide standard or halogen-free cabling ducts to the required length. Cuts are clean, without burrs, and with the exact required angle. This tool can be installed at a workbench. VK-AKZ notching pliers are made for breaking out sections of the side walls cleanly and completely all the way down to the base of the cabling duct. Expanding rivets can be processed safely and quickly using the SN-SW setting tool. Featuring a long shaft, it facilitates setting rivets in deep channels or in other difficult-to-access positions. CONTA-CLIP supplies VK cabling ducts with a length of two meters. These ducts made of rigid PVC are notable for their excellent form stability. They feature tight-fitting covers that nevertheless allow for very easy detachment and reattachment. The material is lead-free, flame-retardant, and self-extinguishing according to UL 94 V-0. CONTA-CLIP also provides cabling ducts in accordance with VDE 0472 part 815 for use in public buildings. These are manufactured from halogen-free plastic that does not release toxic gases in case of a fire. Moreover, this material meets the F2 and I3 requirements of the NF F 16-101 railway standards. CONTA-CLIP also supplies miscellaneous accessories such as flexible cabling ducts, coiled tubing, wire holders, support lugs, and expanding rivets.

Datum: 24.05.2019

Zeichen: 1466

CONTA-CLIP provides all necessary tools for customizing its VK-series cabling ducts

Download

CONTA-CLIP now offers a combination of a hydraulic hand pump and sheet-metal punching tool. Users can thereby produce break-outs in control cabinets for KDSClick, KDS-FB, KDS-KV, and KES cable entries within a few minutes. The hydraulic hand pump contains no hose and features a user-friendly, compact design. It weighs only 2 kg. The hydraulic cylinder can be rotated and swiveled by 360° along three axes, allowing for flexible use even in hard-to-reach places. The punching tool includes round hole punchers for all diameters from M20 to M63 for KDS-KV separable cable glands and square and rectangular hole punchers for all KDSClick, KDS-FB, and KES cable entries as well as for 110 by 131 mm KDS-FP flange plates. In order to create a break-out in a sheet-metal enclosure, the hydraulically operated draw bolt is inserted in a bore hole. Next, stamp and matrix are fixed with counter nuts both on the inside and outside. When operated, the draw bolt pulls stamp and matrix towards each other, producing the opening in the required size. The built-in punch-hole marking tip can be used to clearly punch-mark the drill points for screw-on attachment of the cable entry. Stamps are available for 3 mm sheet steel and 2 mm stainless steel.

Datum: 30.04.2019

Zeichen: 1240

CONTA-CLIP offers its punching tool for break-outs in control cabinets with a hydraulic hand pump

Download