Clip-on base system

Extruded profiles can be used for the main holders of printed circuit boards. The profiles have one or two PCB levels and are delivered in two-meter lengths. They can be easily shortened with a saw to the correct length. Naturally, we will also deliver the profiles according to your requirements. The profile can be shortened freely, without rigid pitch divisions. The individual fit of the enclosure profile to the electronics is thus guaranteed.

Filtre produit

Product description
Length
Width
Material

AP 0/TS OG

Art.Nr.: 3133.3

End plate with snap-in mounting foot for locking base system RS-SP 0, colour: orange. Enables profile to be mounted on Mounting rail TS 35 DIN rail, colour: orange
Details

AP 0/D OG

Art.Nr.: 3134.3

Mounting plate for direct mount to locking base system RS-SP 0. Enables profile to be mounted on mounting plates using M5 screw, colour: orange
Details

BS RS

Art.Nr.: 4560.0

Mounting screw for locking base systems RS-SP, for attaching the mounting feet, end plates and covers
Details

RS-SP 0 2000 mm OG

Art.Nr.: 5675.3

Extruded profile for locking base system, length: 2000 mm, lower part, width: 46.5 mm, width of PCB: 42.5 mm, colour: orange, Note: required profile length = PCB length - 4 mm
Details

RS-SP 1 2000 mm OG

Art.Nr.: 5680.3

Extruded profile for locking base system, length: 2000 mm, lower part, width: 84 mm, PCB width: 68 or 73 mm,, colour: orange, Note: required profile length = PCB length - 4.5 mm
Details

AP 1/TS OG

Art.Nr.: 5681.3

End plate for locking base system RS-SP 1, closes the profile when mounted with mounting foot for DIN rails, colour: orange
Details

AP 1/D OG

Art.Nr.: 5682.3

Mounting plate for direct mount to locking base system RS-SP 1, Enables profile to be mounted on mounting plates using M5 screw, colour: orange
Details

RF SP 1 OG

Art.Nr.: 5683.3

Mounting foot for locking base system RS-SP 1, Enables profile to be mounted to Mounting rail TS 35 and TS 32 DIN rails, colour: orange
Details

RS-SP 2 2000 mm OG

Art.Nr.: 5690.3

Extruded profile for locking base system, length: 2000 mm, lower part, width: 119 mm, PCB width: 100 or 108 mm, colour: orange, Note: required profile length = PCB length - 4.5 mm
Details

AP 2/TS OG

Art.Nr.: 5691.3

End plate for locking base system RS-SP 2, closes the profile when mounted with mounting foot for DIN rails, colour: orange
Details

AP 2/D OG

Art.Nr.: 5692.3

Mounting plate for direct mount to locking base system RS-SP 2, Enables profile to be mounted on mounting plates using M5 screw, colour: orange
Details

RF SP 2 OG

Art.Nr.: 5693.3

Mounting foot for locking base system RS-SP 2, Enables profile to be mounted to Mounting rail TS 35 and TS 32 DIN rails, colour: orange
Details

AP AD 1

Art.Nr.: 5891.0

End plate for locking base system RS-SP 1, when the AD 1 cover is used, closes the profile when mounted with mounting foot for DIN rails, colour: orange
Details

AD 1/1000 mm

Art.Nr.: 5893.0

Cover for locking base system RS-SP 1, height: 25.3 mm, mounted with mounting screws, colour: transparent
Details

AD 2/1000 mm

Art.Nr.: 5894.0

Cover for locking base system RS-SP 1, height: 44.3 mm, mounted with mounting screws, colour: transparent
Details

AP AD 2

Art.Nr.: 5895.0

End plate for locking base system RS-SP 1, when the AD 2 cover is used, closes the profile when mounted with mounting foot for DIN rails, colour: orange
Details