CC Leiste 2 ZRK Klemmleiste Lang 2014

Rail-mounted terminal blocks in tension clamp connection system ZRK | ZSL

Product finder

Tension clamp terminals ZRK

The versatile terminal block range for conductor cross-sections from 0.2 mm² to 16 mm² includes the ZRK/ZSL feed-through and protective conductor terminal block series, the ZRKD/ZSLD double-deck versions and ZIKD three-gang terminal blocks as well as motor connection, (blade) disconnect, fuse and direct mounting terminal blocks and initiator/actuator terminal blocks for transferring control, encoder and signalling signals. 
The product features: proven - safe - reliable..

Our ZRK tension clamp connection terminals

CONTA-CLIP offers an innovative range of terminal blocks in the tension clamp connection system from the smallest cross-section of 0.2 mm² to 16 mm² in the following versions: Feed-through and protective conductor terminals as well as disconnect, fuse, actuator, sensor, motor connection and direct mounting terminals. The tension clamp top connection enables the safe and fast connection of rigid and flexible 

Product finder

What characterises our tension clamp connection series

UEbersicht Reihenklemmen Zugfeder eng

Our tension clamp connection terminal block series at a glance

ZRKD double-decker terminal blocks

The ZRKD series is available in 13 different versions and, with a width of just 5 mm, offers the connection capacity of flexible or rigid cores up to 4 mm² with a rated current of up to 24 amperes. Solid and flexible conductors with/without ferrules can be connected to the connection system using an operating tool or a standard screwdriver. The tension spring opens when the tool is inserted and makes secure contact between the electrical conductor and the busbar.

Leiste ZRKD

Three-pin terminal blocks ZIKD

The ZIKD 2.5 terminal blocks are available in different versions and, with a width of just 5 mm, offer six connection points on three levels, with the connection capacity of flexible or rigid conductors up to 2.5 mm² and a rated current of up to 24 amps. The lower level is designed as a through or protective conductor connection. All levels can be cross-connected to neighbouring terminal blocks and can also be bridged within a terminal block via a vertical connector.

Leiste ZIKD

Knife disconnect clamps ZTRK

The ZTRK basic terminal block range is available in 2-, 3- and 4-wire versions and can be used variably in combination with the product-related accessories programme. Without equipment, the three basic terminals are used to hold auto fuses or diode plugs. Alternatively, the base terminals are available equipped with disconnect blades or fuse holders for G-fuses.

Leiste ZTRK

ZST plug-in tension clamp connection system

The modular and flexible ZST connection system from CONTA-CLIP is in demand wherever prefabricated functional units need to be connected and/or replaced. This enables pluggable wiring up to a rated current of 24 A and a rated voltage of 500 V.

Strang HighRes no shadow 1

Wall bushing for ZST

Wherever prefabricated functional units need to be connected and/or replaced, the modular and flexible ZST connection system from CONTA-CLIP is in demand. This enables pluggable wiring up to a rated current of 24 A and a rated voltage of 500 V.

2

Initiator terminals | Actuator terminals ZINI | ZAKTO

Our ZINI/ZAKTO system family fully fulfils these requirements and consists of the ZIZA basic terminal blocks and the ZPL potential distribution strips. The ZIZA basic terminal block is designed as a feed-through terminal block and carries the signal level. It enables the potential distribution strips ZPL (plus, minus and PE potential) to be accommodated. The potential distribution strip consists of a single disc with one electrical connection each. Depending on the application, these individual discs can be linked to form the required number of poles.

Leiste Zini Zaklo

Compact terminal block series for direct mounting ZSRK

ZSRK 2,5/2A/D/F and ZSRK 2,5/2A/RC are tension clamp direct mounting terminal blocks with an internal cross-connection channel. Compact and modular, with a clamping range of 0.08-2.5 mm2 and a rated voltage of 800 V, they offer the option of mounting a terminal block with the desired number of poles and screwing it directly onto the mounting plate (ZSRK 2.5/2A/D/F) or snapping it on directly (ZSRK 2.5/2A/RC).

Musterleiste ZSRK2 5 D RC

Plug-in connection adapter for the ZRK tension clamp connection system

The standard ZSRK 2.5; ZRK 2.5 and ZRKD 2.5 spring-cage terminal blocks from our CONTA-CONNECT range can be retrofitted via the STL 950/.../5.08-G-L pin headers. Each connection level can be quickly, easily and securely connected to the pin header.

ZSRK 2 5 2A
AdobeStock 581912335

Discover the product world of CONTA-CLIP

With our digital catalogue, you can get an overview of our service portfolio and identify suitable solutions for your requirements within a very short time.

Simply select the technical features you require and our product catalogue will filter the right product for you.

DIRECTLY TO THE PRODUCT FINDER

Suitable products you should know

Schraub-Anschluss

Entdecken Sie unsere Schraub-Anschluss-Produkte: SRK-Durchgangs-/Schutzleiterklemmen, TK-Transformatorenklemmen, SVB-Schraubverteilerblöcke & SDK-Durchführungsklemmen. 

SRK 780X530 02

Push-in connection

Discover our push-in connection products: PRK feed-through/protective earth terminals, push-in transformer terminals and much more, ideal for your needs.

PRK Leiste

Bolt connection

With secure connections for threaded bolts (M6 to M16), rated current from 125A to 520A, up to 1000V voltage. For cross-sections from 2.5 mm² to 300 mm², ideal for a wide range of requirements.

HSKG 780X530

Downloads for our terminal blocks

Are you interested in our rail-mounted terminal blocks? Here you will find all relevant documents to download. Discover the special features of our terminal block range and download our catalogues to get to know our wide selection of terminal blocks.

DOWNLOADS

Contact & Support

Use our hotline and contact our experts directly!

Technischer Support

Contact our experts directly!

phone +49(0)5257/9833-200
mail support@conta-clip.de

 

Use our free remote access via TeamViewer

Contact via TeamViewer is only possible after a request from the support team.

FREE REMOTE ACCESS VIA TEAMVIEWER

Send us an enquiry using our contact form.

* Mandatory field

AdobeStock 513674734 Newsletter

Would you like to be informed regularly? Then subscribe to our newsletter: