Strong connections in the proven screw connection system!
Everything for classic wiring in the screw connection system - even for high currents: from SRK feed-through and protective conductor terminals to RK high-temperature variants for conductor cross-sections from 0.2 mm² to 240 mm². The classic: proven - safe - reliable..
SRK screw connection system
The tried-and-tested terminal blocks in the screw connection system with a minimum cross-section of 0.08mm2 to 120mm2 are available in feed-through and protective conductor terminal block versions. The easy-to-use screw connection element enables rigid and flexible conductors with and without ferrules to be connected safely and quickly. To ensure mechanical and electrical safety, the PE foot contact on all PE conductor terminals is designed with screwless latching on both sides and up to a cross-section of 35 mm².
Compact and contour-matching
The external geometry of the SRK feed-through and SSL protective conductor terminals is identical for cross-sections of 2.5 mm², 4 mm², 6 mm² and 10 mm². Standardized end plates and partition walls are therefore possible. The overall width is 2.5 mm² (5 mm), 4 mm² (6 mm), 6 mm² (8 mm) and 10 mm² (10 mm). Despite their compact design, SRK feed-through terminal blocks offer a rated voltage range of up to 1000 V.
Our screw connection terminal block series at a glance
PRK terminal blocks - PSL protective conductor terminals
Our PRK terminal blocks and PSL protective conductor terminal block series (1.5mm² to 16mm²) offer the optimum connection for your conductors with 2, 3 and 4 wire connections. Solid and flexible conductors with conductor sleeves can be connected quickly and easily without tools. Only the pusher needs to be actuated to disconnect the conductor.
PRK terminal blocks - PSL protective conductor terminals
Our PRK terminal blocks and PSL protective conductor terminal block series (1.5mm² to 16mm²) offer the optimum connection for your conductors with 2, 3 and 4 wire connections. Solid and flexible conductors with conductor sleeves can be connected quickly and easily without tools. Only the pusher needs to be actuated to disconnect the conductor.
PRK terminal blocks - PSL protective conductor terminals
Our PRK terminal blocks and PSL protective conductor terminal block series (1.5mm² to 16mm²) offer the optimum connection for your conductors with 2, 3 and 4 wire connections. Solid and flexible conductors with conductor sleeves can be connected quickly and easily without tools. Only the pusher needs to be actuated to disconnect the conductor.
Fuse disconnect terminals SSIK 4 | SSIK 6
The SSIK fuse disconnect terminals made of glass fiber-reinforced polyamide PA 6.6 V-0 offer interesting application possibilities in electrical engineering thanks to the extended temperature range of the housing material up to 140 °C (RDI Elec). They are characterized by good dimensional stability at elevated temperatures. The terminal blocks have a hinged disconnect lever that locks in the end position and can accommodate a spare fuse on the side. Two cross-connection channels within the fuse disconnect terminal blocks enable potential distribution to adjacent fuse and feed-through terminal blocks from the SRK series.
Test disconnect terminals SPTK
SPTK test disconnect terminal blocks are primarily used in the field of electricity generation and electricity supply. They are tailored to the diverse switching requirements of current transformer secondary circuits. When replacing measuring instruments, electricity meters and for comparative measurements, current transformers must always have a closed secondary circuit. All versions are safe to touch in accordance with DGUV regulation 3. The current or voltage paths are separated by means of a captive, screwable isolating slide. The switch position is clearly visible at all times as the disconnecting screw has a yellow insulating sleeve.
PRK terminal blocks - PSL protective conductor terminals
Our PRK terminal blocks and PSL protective conductor terminal block series (1.5mm² to 16mm²) offer the optimum connection for your conductors with 2, 3 and 4 wire connections. Solid and flexible conductors with conductor sleeves can be connected quickly and easily without tools. Only the pusher needs to be actuated to disconnect the conductor.
Discover the product world of CONTA-CLIP
With our digital catalog, you can get an overview of our service portfolio and identify suitable solutions for your requirements within a very short time. Simply select the desired technical features and our product catalog will filter the right product for you.
Suitable products you should know about
DOWNLOADS
Contact & Support
Use our hotline and contact our experts directly!
Contact our experts directly!
phone +49(0)5257/9833-200
mail support@conta-clip.de
Use our free remote access via TeamViewer
Contact via TeamViewer is only possible after a request from the support team.
Send us an inquiry using our contact form.
Important notice
For your own safety, please switch to an up-to-date browser in order to be able to make full use of our services.
Your web browser is outdated and contains open security vulnerabilities
To ensure the security of your data, some functions on our website may not be accessible with your browser.
For your own safety, please switch to an up-to-date browser in order to be able to make full use of our services.
Microsoft Edge
Successor to Internet Explorer
Google Chrome
Mozilla Firefox