Rail-mounted terminal blocks in tension clamp connection system ZRK | ZSL

The ZRKD series is available in 13 different versions and, with a width of just 5 mm, offers the connection capacity of flexible or rigid cores up to 4 mm² with a rated current of up to 24 amperes. Solid and flexible conductors with/without ferrules can be connected to the connection system using an operating tool or a standard screwdriver. The tension spring opens when the tool is inserted and securely contacts the electrical conductor with the busbar.

The ZTRK basic terminal block range is available in 2-, 3- and 4-wire versions and can be used variably in combination with the product-related range of accessories. Without equipment, the three basic terminals are used to hold auto fuses or diode plugs. Alternatively, the base terminals are available equipped with disconnect blades or fuse holders for G-fuses.

The modular and flexible ZST connection system from CONTA-CLIP is in demand wherever prefabricated functional units need to be connected and/or replaced. This enables pluggable wiring up to a rated current of 24 A and a rated voltage of 500 V.

Wherever prefabricated functional units need to be connected and/or replaced, the modular and flexible ZST connection system from CONTA-CLIP is in demand. This enables pluggable wiring up to a rated current of 24 A and a rated voltage of 500 V.

Our ZINI/ZAKTO system family fully meets these requirements and consists of the ZIZA basic terminal blocks and the ZPL potential distribution strips. The ZIZA basic terminal block is designed as a feed-through terminal block and carries the signal level. It enables the potential distribution strips ZPL (plus, minus and PE potential) to be accommodated. The potential distribution strip consists of a single slice with one electrical connection each. Depending on the application, these individual disks can be linked to form the required number of poles.

ZSRK 2,5/2A/D/F and ZSRK 2,5/2A/RC are tension clamp direct mounting terminal blocks with an internal cross-connection channel. Compact and modular, with a clamping range of 0.08-2.5 mm2 and a rated voltage of 800 V, they offer the option of mounting a terminal block to the required number of poles and screwing it directly onto the mounting plate (ZSRK 2.5/2A/D/F) or snapping it on directly (ZSRK 2.5/2A/RC).

The standard ZSRK 2.5; ZRK 2.5 and ZRKD 2.5 spring-cage terminal blocks from our CONTA-CONNECT range can be retrofitted via the STL 950/.../5.08-G-L pin headers. Each connection level can be quickly, easily and securely connected to the pin header.