Communiqués de presse

Vous trouverez nos communiqués de presse actuels ici.
Contactez-nous, si vous avez des questions sur notre entreprise ou nos produits.
Nous attendons votre message avec impatience.

(Kopie 3)

New FNT 16 neutral disconnect terminal for 2.5 – 25 qmm

06 février 2019

CONTA-CLIP expands its range of single-level push-in installation terminals, adding the FNT 16 neutral disconnect terminal for wire cross sections between 2.5 qmm and 25 qmm (up to 16 qmm with wire-end ferrules). The push-in connection system allows for safe connection of wires without tools. When a solid wire or ferrule is inserted, the pressure spring opens automatically and establishes a secure contact. Standard screwdrivers can be used to connect and disconnect flexible wires without ferrules. The disconnect terminal integrates a receptacle for the 10x3-mm neutral busbar. There is no need for an additional fixing plate. The neutral busbar is securely connected via a screw-less slider. Like FRKI feed-through terminals and FSLI PE terminals, the neutral disconnect terminals can be used alongside FDLIS three-level installation terminals, because the position of the neutral busbar is identical in both versions.

Datum: 06.02.2019

Zeichen: 924

The new FNT 16 neutral disconnect terminal has a contact wire range of 2.5 mm? to 25 mm?


New KDS-FB cable entry for five round-cable sealing elements

16 janvier 2019

CONTA-CLIP continuously expands the KDS-FB flat ribbon cable entry system. The portfolio currently comprises a total of 13 cable entries with four frame widths and various divisions for flat and round cables. The latest addition is a pre-configured cable entry with five sealing elements to accommodate round cables. The new variant has a 39 mm x 120 mm frame size. Like all KDSClick cable management solutions, the KDS-FB line is based on a few basic components designed for tool-less assembly and tool-less placement into a frame. Once the one-piece frame is screwed on the opening from outside the enclosure or distribution cabinet, flat or round cables fitted with suitable sealing elements can simply be pushed in from the inside for a snug insertion into the frame slots. TPE gaskets are molded directly into the frames to ensure high, IP66-rated ingress protection. Sealing elements with gills all around ensure an absolutely tight fit and reliable ingress protection. The gaskets for flat cable entries additionally feature gills in the cable openings. Sealing elements are available for all common industrial cable sizes. KDS-FB thus allows manufacturers to pre-configure machine housings or cabinets for later wiring with no need for advance detailed knowledge of specific end-user requirements. The sealing elements for different cable diameters all have uniform sizes. Due to the easy, tool-less exchange of the sealing elements, the cabling can therefore be changed at any time.

Datum: 16.01.2019

Zeichen: 1491

The new KDS-FB variant accommodates five round-cable sealing elements


UL- and VDE-certified cabling ducts

29 août 2018

CONTA-CLIP offers a wide range of UL- and VDE-certified cabling ducts. These ducts are notable for their excellent form stability. They also feature tight-fitting covers that allow for very easy detachment and reattachment. Pegs with pre-determined breakage points enable comfortable customization of the ducts for incoming and outgoing cabling. The product comes with deburred edges to minimize the risk of injury during assembly and cable fitting and to protect the cable sheathing. The ducts are supplied with a standard length of two meters. They are made from a rigid PVC material that is lead-free, flame-retardant and self-extinguishing according to UL 94 V-0. For use in public buildings, CONTA-CLIP also provides halogen-free versions in accordance with VDE 0472 part 815. In case of a fire, the plastic these cabling ducts are made from does not break down to release toxic gases. Moreover, this material meets the F2 and I3 requirements of the NF F 16-101 railway standards. The product range also includes all the necessary tools for mounting, like, for instance, the VKS cutter for exact 90° angle cuts of cabling ducts up to a width of 125 mm. Another one is the ergonomically shaped SN-SW setting tool that allows for secure, high-speed application of expanding rivets. Its long shaft makes it suitable for placing rivets even in very deep ducts and in other places that are otherwise hard to reach. The VK-AKZ notching pliers can be used to work on the walls of a cabling duct and break off the pegs all the way to the bottom. CONTA-CLIP also supplies miscellaneous accessories such as flexible cabling ducts, coiled tubing, wire holders, support lugs and expanding rivets.

Datum: 29.08.2018

Zeichen: 1689

Excellent dimensional stability, simple customization: UL- and VDE-certified cabling ducts from CONTA-CLIP


New IP66 ribbon cable entry system

04 juillet 2018

Introducing the new KDS-FB cable entry system for flat ribbon cables, CONTA-CLIP expands its KDSClick program of cable management solutions. As is typical for this product range, the system consists of only a few modular components that are easy to assemble without tools. First, the one-piece frame is screwed on the opening from outside the enclosure or distribution cabinet. Next, the cables are pushed through the cable openings of the sealing elements, which are then inserted in the frame slots from the inside. TPE gaskets are molded directly into the frames to ensure high, IP66-rated ingress protection. Sealing elements with gills outside and in the cable openings ensure an absolutely tight fit and reliable ingress protection. CONTA-CLIP provides KDS-FB in four frame widths and with different divisions for flat and round cables. Sealing elements are available for all common industrial cable sizes. The manufacturer has implemented a particularly user-friendly innovation: the sealing element for the smallest cable size is sealed by a membrane. It can therefore also be used as a blanking plug. KDS-FB allows manufacturers to pre-configure machine housings or cabinets for later wiring with no need for advance detailed knowledge of specific end-user requirements. Due to the easy, tool-less exchange of sealing elements, the wiring can be changed at any time.

Datum: 04.07.2018

Zeichen: 1374

The new KDS-FB-type, IP66-rated system enables easy entry of ribbon cables


EMC rail for KDSClick cable entry system

29 mai 2018

Accompanying the KDSClick cable entry system, CONTA-CLIP supplies easy-to-install, galvanized EMC rails for safe and secure shield termination of cables. KDS-EMV-SAB type rails are attached to the KDSClick mounting screws inside control cabinets and secured with a nut. The manufacturer's SAB program also includes spring-loaded and screw-connection clips for all cable diameters. These ensure large-surface grounding. In addition to shunting electromagnetic interference, the shield-connection clips provide strain relief.

Datum: 29.05.2018

Zeichen: 523

EMC rails for the KDSClick cable entry system enable safe and secure shield connection


Flange plate KDS-FP – cable management at its best

21 avril 2018

With the KDS-FP flange plate, CONTA-CLIP take the tool-free click-and-push concept of their cable entry system KDSClick to a larger scale for control cabinet construction. With this system extension, the connection technology experts primarily address the needs of series machine and special purpose machinery manufacturers, who are dealing with wiring requirements for cabinet packing that keep changing all the time. KDS-FP is an extra-flexible solution for managing cables and pneumatic or hydraulic tubes: the number and diameters of the required openings can be seamlessly adapted at any time without drilling, sawing or other machining. At all times, the system reliably provides IP66 sealing. First, a cavity with standard dimensions in the cabinet wall is fully and tightly sealed by screwing on the flange plate. Then, up to three plate segments can be broken off at predetermined breaking points as needed without the use of tools. Each removed segment reveals a 40x110mm duct that can be further divided into up to ten frame openings by snapping frame inlays from the KDSClick series into place. The inlays are available as plain partitions, T-pieces or cross and double cross form to allow for the required custom dimensioning of the frame openings. CONTA-CLIP offer a continually expanding range of different sealing elements (currently numbering about 100) for sealing lines and tubes of various diameters as well as feeding multiple cables through one frame opening. The sealing elements, which feature a crinkle cut at the side, are simply placed around the wires and ensure not only a precise and tight seal but also provide the connections with a reliable strain relief. After the wires are sheathed, the elements are inserted from the inside of the cabinet and pushed to the outside through the frame openings defined by the inlays. Thanks to the conical tapering, the sealing elements are easily and effortlessly pushed into the frame opening/inlays and just as easily removed for new or additional wiring. Unused frame openings are safely closed off with sealing plugs. This ensures comfortable changes to the wiring, even for single cables, without having to disassemble the frame. Two flange plate types are initially available: KDS-FP-2x10/24 and KDS-FP-3 x 10/24 for up to 20 or up to 30 configurable frame openings, respectively. More form factors are already in development. For users who want an additional strain relief of the cable towards the inside of the cabinet, a locking accessory for sealing elements provides a toolless solution that can be clicked into undercuts at the back of the flange plate.

Datum: 21.04.2018

Zeichen: 2737

The flange plate KDS-FP provides flexible cable management and IP66 ingress protection


Relations de presse

Vous trouverez ici la ligne directe vers notre service de presse interne ... Envoyez-nous un e-mail à et vous recevrez immédiatement une réponse aux demandes d'interviews, d'informations et d'images


Pour permettre la présentation de nos annonces sur ce site, nous utilisons les cookies nécessaires aux fonctions essentielles du site.

D’autre part, nous utilisons d'autres cookies facultatifs pour optimiser en permanence notre offre. Vous pouvez trouver une liste complète et une description de ces cookies en cliquant sur le bouton Détails. Vous pouvez également accepter tous les cookies ou seulement les cookies nécessaires. Veuillez noter que notre offre avec des cookies limités peut ne pas être entièrement utilisable.

Pour plus d'informations, veuillez lire notre politique de confidentialité.


21, Rue des sources
77176 Savigny-le-Temple, France

Tel +33 1 64 89 75 80
Fax + 33 1 60 63 91 29

Formulaire de contact