KDS Cable Management Systems

The KDS and KES cable entries and SAB|SSAB|SABK shielding solutions enable a tool-free, IP66-sealed feed-through for unassembled and assembled cables and hoses. The feed-through openings can be adapted at any time to meet your requirements. The SAB shield-connection clips can be used to provide a reliable shield contact with conductor diameters from 3 mm to 35 mm.

 

KDS-R Round cable entries

For metric break-outs from M20 to M63, CONTA-CLIP has added round cable entries for cables with or without attached plugs to its portfolio. In case of maintenance or retrofitting with assembled cable harnesses, cables with diameters from 2 to 35 mm can be quickly and safely inserted into the switchgear cabinets or housings. Sealed according to IP66. The modular system ensures quick and easy assembly in three steps. A reliable seal and absolute secure fit is also provided by the slitted, tapered seals with a wave-cut profile, which, after the cables are routed through the cable entry, are placed around the cables and then pressed into the round cable entry. After that, the separable thread and locking adapter is easily screwed together with the round frame outside the switchgear cabinet. The separable locknuts that are mounted on the inside of the locking elements ensure safe and secure attachment.

Online catalog (KDS-R) Video

Runde Kabeldurchführung

KDS-FP flange plate

The new KDS-FP flange plate provides manufacturers of machines with a very cost-effective, convenient feed-through solution. It can be used to adapt housings and switchgear cabinets to fit your updated requirements at any time, and can also considerably simplify your warehousing. You no longer have to stock switchgear cabinets or distributors with different configurations of assembled cable and cable outlets. Instead, you can uniformly prepare your products with the flange plate and then adapt them at any time to your specific cabling or tubing requirements.

Online catalog (KDS-FP) Video

Kabeldurchführung mit Flanschplatte

KDS-SR Screw frame

Revolutionary cable entry systems

Fast. Safe. Turning cables inside out! The KDSClick cable entry system is a cable management solution for switchgear cabinets, housings and machines that features secure seals and strain relief for pre-assembled and non-assembled cables – with or without connectors. KDSClick saves you time and provides you with maximum versatility. 

Online catalog (KDS-SR) Video animation Assembly video

Kabeldurchführung

KDS-FB Cable entry system for flat cables

The KDS-FB cable entry system for flat cables provides you with outstanding versatility and saves you time while managing cables, especially for industrial trucks, crane systems and elevator applications. The "fish skin" on the seals mechanically surround the inserted flat cable; they ensure optimum tolerance compensation and IP66 protection.

Online catalog (KDS-FB) Video

Kabeldurchführung für Flachleitungen

KES cable entries

When feeding in non-assembled cables, lines and pneumatic hoses (without connected plugs), CONTA-CLIP has a wide range of products that offer alternatives to cable glands or single-membrane feed-throughs.

Online catalog (KES) Video

Kabeleinführung

KDS-KV Separable cable glands

For metric break-outs from M20 to M63, CONTA-CLIP provides separable cable glands for cables with or without attached plugs. In case of maintenance or retrofitting with assembled cable harnesses, cables with diameters from 2 to 35 mm can be quickly and safely inserted into the switchgear cabinets or housings and sealed according to IP66. This separable system ensures quick and simple installation. The slitted seal has a wave-cut profile that ensures a reliable seal and a totally secure attachment. The seal is first  placed around the cable and then inserted in one of the two halves of the cable gland. After inserting the seals, the two halves of the cable gland are simply snapped together. A  locknut (which can also be separated) on the inside of the cabinet  

Online catalog (KDS-DV)

Geteilte Kabelverschraubung

Shield-connection clip

In the field of industrial process engineering, a high degree of interference immunity is required of electrical equipment. This is a critical factor affecting the availability of industrial measurement and control systems.

When constructing low-interference systems, both the cable shielding and the shielded ground are very important. The juncture where the cable shielding connects to the housing ground is a critical point. The connection should be low-ohm and should also feature minimal inductive resistance.

You should be certain that this connection can be established in a practical, simple and quick manner. CONTA-CLIP's SAB/SSAB shielding systems are one of the most comprehensive product portfolios on the market. They offer a perfect solution for any application.

Online catalog (SAB)

Schirmanschlussbügel

Get an overview...

Discover the numerous product innovations out of the area Cable management comfortable and clear at a glance in our catalog 08!

Product catalog (PDF)

We use cookies to continually optimise our website. By continuing to use the website, you agree to the use of cookies. Further information on the use of cookies on our website can be found in our privacy policy.

Technical Support

 

CONTA-CLIP Verbindungstechnik GmbH

Otto-Hahn-Str. 7
33161 Hövelhof

 

Tel: +49 5257 9833-200
Fax +49 (0) 5257 9833-33
Email: support@conta-clip.de

Contact formular