![](/fileadmin/contaclip/media/Picture/Applikationsabbildungen/Sprachversionen_Abbildungen/Foerderband-links-neu-englisch.jpg)
![](/fileadmin/user_upload/27012_6_R.jpg)
Push-in-terminal block (PRK 4)
The new feed-through and protectiveearth terminals are available in 6 cross-section ranges from 1.5 mm² to 16 mm² in 2-, 3- and 4-wire connection variants for wire cross-sections of 0.34 mm² to 25 mm².
![](/fileadmin/contaclip/media/Picture/KES-E.jpg)
Square cable entries (KES-E)
When feeding in non-assembled cables, lines and pneumatic hoses (without connected plugs), CONTA-CLIP has a wide range of products that offer alternatives to cable glands or single-membrane feed-throughs.
![](/fileadmin/contaclip/media/Picture/KES-E-R-neu.png)
Round cable entry system (KES-E-R)
Many cables in the smallest space. With the KES-E-R cable entry system, many cables (without connectors) with different diameters from 1.0 mm to 22.5 mm can be inserted in a very confined space. The cable entry is inserted without tools into the opening provided (variant "A" for wall thicknesses of 1.5 mm - 2.5 mm and variant "B" for wall thicknesses of 2.5 mm - 4.0 mm). To insert the lines, the corresponding membrane (centering point is marked) is pierced and the lines are simply installed through it. The TPE material ensures IP54 tightness.
![](/fileadmin/contaclip/media/Picture/KES_neu.jpg)
KES cable entries
When feeding in non-assembled cables, lines and pneumatic hoses (without connected plugs), CONTA-CLIP has a wide range of products that offer alternatives to cable glands or single-membrane feed-throughs.
![](/fileadmin/contaclip/media/Picture/PVMAK_2_5.jpg)
Push-in motor-connection terminal block (PVMAK 2,5)
The PVMAK 2.5 has a width of only 5 mm. It has four levels with seven connection points and can handle solid or stranded wires up to 2.5 mm² with a rated current up to 22 amps. The lower level is designed as a PE connection.